

Fig. 1

Fig. 2
Check all hydraulic lines for damage or leaks, and replace as necessary before any usage.
Check all visible lifting straps for excessive wear or damage and replace as necessary before any usage.
Check drive chain for proper adjustment (see Fig.1), and inspect for wear or damage. Replace as necessary before any usage.
Check air system oiler level, add approved air motor oil to the air line oiler reservoir as necessary before any usage.
Inspect all Safety Latch components for excessive wear or damage, and make sure they work freely. Do not operate system without these functioning properly!
Inspect all fasteners for tightness. Verify that all retainer clips are in place. Tighten or replace as necessary before any use.
Verify the elevation alignment between both carriers "under load" (see Fig. 2). Do Not operate the system if the alignment exceeds tolerance of a 1 1/2" variation between both carrier elevations. Remove strap cover to adjust center link turnbuckle as necessary, before any usage. (See carrier height adjustment procedures)